Assembly Exits

Assembly Exits

Only available in "MULTIFORM" System units.


These are parts which are formed by the welded connection of curved sheet metal with a radius which corresponds to the main tube for connection and an assembly exit at 30º, 45º or 90º in the diameter required for the shunt.

These units may be fitted once the conduit network has been assembled at any point on a straight section. An opening must first be made in the section which is slightly larger than the shape and section of the shunt unit to be connected. The new part is then welded, riveted or bolted, as required.

For general application in ventilation, air-conditioning and air expulsion units and especially in powder collection and fine particle tube networks.

 Product range: Assembly Exits

Material
Thickness (mm)
Degrees (º)
D (mm)
d (mm)
Product
Galvanized
0,8
30º / 45º / 90º
80 - 175
80 - 175
ROS
Galvanized
1,0
30º / 45º / 90º
200 - 1000
200 - 1000
ROS
Inox 304
0,6
30º / 45º / 90º
80 - 175
80 - 175
ROS
Inox 304
0,8
30º / 45º / 90º
200 - 1000
200 - 1000
ROS

Pol. Ind. Pla de Poliger, Sector Nord - Sau 1 -
17854 SANT JAUME DE LLIERCA (Girona) SPAIN - Tel. +34 972 26 14 67

Distributed by: Micrologic, S.L.U.

GPI Software - Internet & Web Solutions

Este sitio web utiliza cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación. Si continua navegando, consideramos que acepta su uso. Puede saber más sobre nuestra política de cookies aquí

Accept